How to connect a digital TV set-top box to a TV: instructions, methods and settings

2024 Author: Leah Sherlock | [email protected]. Last modified: 2023-12-17 05:25

How to connect a set-top box for digital TV? If this question has not yet interested you, then most likely you will have to face it in the very near future. Almost all TV channels show a video every day that every Russian has received a gift for the New Year. Twenty free TV channels are now available in all parts of the country. And it really is.

But this innovation is fraught with other news. Analog television, which has operated in Russia for more than half a century, will cease to exist this year, 2019. That is why many people are now concerned about the choice of television tuners. When a suitable model has already been purchased, it remains only to figure out how to connect a digital television set-top box to a TV. This is what will be discussed in this article. It is worth remembering that the finalanalogue broadcasts will be switched off in June-July. This means that from the summer it will be possible to watch major federal channels only in digital format.

About regional channels

But what about the programs that are broadcast by local television? After all, every major city has its own TV channel. These media were given a period of one year to switch to the new format. Therefore, those who want to watch not only digital television, but also regional (analog) television, need to purchase a small device called a splitter or splitter. With it, the television antenna cable will be divided into two. One of them should be connected to the set-top box, and the second - as before, to the antenna jack of the TV. The splitter is not very expensive, and for a few hundred rubles you can buy a quite high-quality device.

If the set-top box is equipped with an antenna output, then there is no need for a splitter. In this case, the TV is connected to the set-top box also through this connector.

As already mentioned, watching digital television, as well as analog television, requires an antenna. It is broadcast on decimeter waves. Some analog TV channels, such as MTV, were also transmitted on them. Therefore, most likely, you will not have to buy a new antenna. Decimeter TV channels have existed in our country for more than twenty years, which means that many homes have a device for receiving them. If you are using a room antenna, then a sign that it "catches" decimeter waves is the presence of a characteristic roundparts.

If your TV is connected to a common antenna located on the roof of a building, you should find out if it is suitable for receiving digital signals. Most likely, it has such a function.

How is the antenna connected?

How to connect an antenna to a digital TV set-top box? The solution to this issue usually does not cause much difficulty.

The antenna cable plug is inserted into the corresponding socket of the set-top box. As already mentioned, those who want to watch not only digital, but also analogue regional channels may have to get an antenna splitter or, as it is also called, a splitter. In this case, you need to connect according to the following scheme: a splitter is connected to the cable, from which two wires extend, one to the set-top box, the other to the TV itself.

How to connect a TV through a digital TV box

When the antenna is connected, connect the tuner to the TV. Set-top boxes are usually equipped with one or more connectors dedicated to this purpose.

As a rule, they are located on the back of the device. The most common of these are hdmi and a three-way connector, in which each socket has a different color (usually white, yellow and red). It is popularly called "tulip" because of its bright color.

If your TV is also equipped with these two connectors, you can choose any.

Formusic lovers

Those who like to watch TV with high-quality sound usually choose to connect using a "tulip". In this case, one of the three wires is used to connect the set-top box to the TV (image transmission), and the other two are used to connect the tuner to audio equipment (speaker system, soundbar, music center, and so on). You should pay attention to this option also because set-top boxes, as a rule, can also perform the function of media players, that is, play video and sound files from flash drives. Therefore, to obtain not only a high-quality image, but also sound, you need to connect the TV tuner to the TV in this way.

If the connectors do not match

This problem is quite common. A person purchased a TV tuner, and only when he came home from the store, he discovered that the connectors on his TV, designed to connect third-party devices, do not match the "outputs" of the purchased device. How to connect a TV box in this case? You can solve this issue by purchasing a special adapter. At one end it has a connector of one type, and at the other - the second. For example, an adapter can be from hdmi to "tulips", and vice versa.

Vintage tech

If you use an old Soviet model TV, on the body of which there are no other connectors other than the antenna "jack", you will have to buy a device called an RF modulator. With it, audio and video signals received via hdmi or "tulip",are converted to those that can be transmitted through the antenna input.

Experts say that it will not be difficult for an experienced radio amateur to make such a device on his own. If you are not one of them, then you need to buy it. You can do this in almost all radio stores.

About wires

Don't be surprised if your set-top box doesn't come with the right cable to connect it to your TV. This happens quite often. Some models do not even include batteries for the remote control. In addition, experts recommend not using the wires from the kit, but purchasing the cord separately, since the quality of the accessories supplied with the equipment, as a rule, leaves much to be desired. You can often hear stories that when connecting a TV tuner to a speaker system with a cable from the kit, the sound was not clear, but with a background.

When the same equipment was connected with a wire that had been in use for many years, the unpleasant sound disappeared. Experts say that it is best not to buy a ready-made cable, but to purchase a wire and plugs, and make it yourself from these parts. But this, of course, is only suitable for those who are friends with a soldering iron.

Monitor

How to connect a digital TV set-top box to an ordinary TV has been discussed in detail in previous chapters. In short, the sequence of actions should be as follows. First, connect a TV antenna to the tuner, and then connect the purchased device toTV. I must say that such devices can also be used with computer displays.

How to connect a monitor to a digital TV set-top box? This issue will be discussed further.

Monitor connectors

On the most modern models of monitors, as a rule, there is an hdmi connector. It can also be found on the back of most TV tuners. If your equipment is equipped with such inputs and outputs, then all that remains is to connect the devices to each other.

Older computer monitors (tube, CRT, and LCD) only have a VGA connector.

Some tuners are also equipped with it. If these device parameters match, then you also just have to find the right cable. Otherwise, you can use a device called a converter - this is also a kind of adapter.

After the connection has been made, you should take care of the sound. It must be said that some modern models of computer displays are equipped with built-in speakers, which means that they are able to reproduce sound. If the set-top box is connected to a monitor that does not have such a function, then speakers must be connected to the tuner. Don't forget about the antenna. If you are using a shared outdoor device to receive the signal, you may need a splitter. With it, you can connect a TV to the antenna in one room, and a monitor in another. If one TVIf you plan to connect the prefix to one or another device, then you should think about using an indoor antenna.

Experts' Choice

Many online sources name Lumax products as the best TV tuner models.

Next, the main characteristics of these models will be listed. All devices of this line can record TV broadcasts on a flash drive and have the Timeshift function. Some of them can be connected to the Internet via Wi-Fi. How to connect a Lumax digital TV set-top box? All the above instructions and recommendations apply to the equipment of this company. It should be noted that such tuners have hdmi and "tulip" connectors. Unlike many other TV receivers is the ability to connect them to the Internet. When the Lumax set-top box is connected to the TV, then, as is the case with other models, it must be configured. To do this, according to the instructions given in the instructions, you must first select the region and time zone, and then start automatic channel tuning.

As a rule, this is enough to enjoy watching digital TV in a few minutes. We can say that the question of how to connect digital television through a set-top box has been almost completely considered, it remains to say about some of the nuances. If the device could not detect the channels, then you should register their frequencies in the settings (they are different for each region). If you have a Lumax set-top box or any other with the ability to connect to the World Wide Web, then you need to find the "Connection" item in the settings.to the network" and enter the Wi-Fi password in it.

By doing this, you get the opportunity to use the Lumax cinema hall, which contains several hundred films related to the classics of Russian cinema. Also, after connecting, you can watch videos from YouTube.

Conclusion

The article discussed in detail the question of how to connect a digital television set-top box. We hope that the recommendations presented will be useful.