How to draw an automaton: step by step instructions

2024 Author: Leah Sherlock | [email protected]. Last modified: 2023-12-17 05:25

Every boy dreams of having his own weapon and leading an entire army, at least on paper. But not everyone knows how to draw a machine gun. There are many types of this formidable weapon. Today we will consider a step-by-step instruction for a schematic representation of an ultrasound machine. It was developed in 1954 by Israeli army officer Uziel Gal. By his name, they called the machine gun, which is now used by special forces.

Draw the base

In order to understand how to draw an automaton, it is not necessary to have special artistic skills. It is enough to clearly follow the instructions and know the basic principles of a schematic representation of this military equipment. First you need to outline the boundaries of our future drawing. To do this, draw six main lines. The first two lines should be drawn with a ruler. They are located in parallel, at a distance of 5-7 millimeters from each other. This distance is equal to the muzzle of our future automaton. The next parallel line must be drawn above these two stripes, so that the width between the lower and upper lines isapproximately 3-5 centimeters. This distance is equal to the trunk of our design. Now the last, topmost, parallel line remains. It is necessary to outline the size of the main parts of the trunk. Now let's start drawing perpendicular lines. We will need them to draw the barrel and bolt of the future weapon.

Outline contours

To figure out how to draw a machine gun with a pencil in stages, carefully look at the proposed drawings. Focus on your lines and work separately in each sector. Let's start with the top sector. Between the top, fourth and third lines, begin to draw the outline of the details of the trunk. This is a careless straight line, with three bumps. Now, from the base of the back of the third and second lines, draw two straight parallel lines obliquely down, ending at the front perpendicular line. Now draw both lines down, ending at the base of the base sketch line. It was you who drew the shutter of your future machine gun. Now draw the handle of the weapon, using the rightmost sector for this. Draw a rough rectangle, rounding its base. Now go to the sector between the first and second line and draw the barrel. It remains to connect all the lines of the future machine, where there is space, and outline the location of the trigger mechanism.

Draw the details

Now, before proceeding to further work and understand how to draw an automaton, compare your sketch with the proposed sketch. At this stage, it is important not to rush, otherwise, if you did something wrong, you will have to start all over again. Carefully draw all the details: trigger mechanism, fuse, shutter. Follow soft smooth lines to make the weapon look more natural. This step may take you the most time. This depends on your creativity. If you do not have them, then do not try to repeat all the details that you see in the picture. Better leave a schematic representation of the design.

Remove extra lines

Now you almost figured out how to draw an automaton. It remains to carefully erase the base lines and paint on the missing small details. Now the drawing can be colored. Of course, in the original, ultrasound is produced in black. However, everything is possible in your war. Therefore, you can invite the child to use different colors, for example, green, blue or sand. Thus, having mastered the basic principles, now you can easily figure out how to draw a Kalashnikov assault rifle or AK-47.