How to draw a fly with a pencil? Step-by-step instruction

2024 Author: Leah Sherlock | [email protected]. Last modified: 2023-12-17 05:25

To draw a fly, you need a simple pencil, a piece of paper and a little time. During the first few steps, you should avoid strong pressure, it is better to use light, smooth strokes.

Step 1

To draw a fly, you should start with the chest. Make a light sketch of the circle. Leave enough room on the sides for the rest of the body and head.

Step 2

Draw a wide arc on the left side of the circle to complete the sketch for the fly's ribcage.

Step 3

Next, add a circle to the left for the lower half of the fly's body - the belly. This circle should be larger than the first one and placed slightly below the chest.

Step 4

Draw some curved lines around the circle to complete the belly. Two to connect with the chest on the right and one thin - on the left in the lower abdomen.

Step 5

Draw a small circle on the right side of the chestcells. This will be the head.

Step 6

Draw a U-shaped arc around the circumference as a guide for the bottom half of the fly's head.

Step 7

Draw a small curved line under the head (mouth sketch). Then you need to add another long and thin arc from the chest to the middle of the abdomen. These are the wings of the future.

Step 8

Draw three curved lines (legs) under the body of the fly. Pay special attention to the fold lines. Later, joints will be located there. The first two legs look forward, while the back one looks back. Drawing a fly with a pencil in stages is not difficult at all, the main thing is not to rush and not press too hard on the pencil. The initial sketch is ready! From this point on, you can press harder on the pencil so that the drawing begins to take on more defined features.

Step 9

Draw a large connection at the head to form the eye, which should take up a fairly large portion of the space. The shape is slightly oval with a flatter left side.

Step 10

Draw a short downward antenna on the right side of the head using a series of small segments.

Step 11

Change the initial shape of the head a bit, making the top a little thinner and the bottom a little wider. Add a couple of lines on the left side to connect with the chestcage.

Step 12

Use the line below the fly's head as a guide to draw the mouthparts or lips. This simplified version includes a number of different sized segments.

Step 13

Draw small hair-like strands around the fly's head. Use quick, short strokes of different sizes to create fluff.

Step 14

Use the line on the right side as a guide to draw the front foot, which has six segments.

Step 15

The second line serves as a guide for the second leg on the right side of the fly's body. Following the main path of the guide line, the presser foot is divided into five segments of different shapes and sizes.

Step 16

Use the line on the left as a guide to draw the third leg which is on this side of the fly's body. Draw five separate segments. Make sure all legs come out of the chest and not out of the stomach.

Step 17

Use the arc at the fly's upper body as a guide for drawing the wings. Extend the line so that the base of the wing is inside the chest. Add another line above the wing that will be parallel to the shape of the wing on the other side.

Step 18

With orientationon the initial forms of the body with more confident strokes, you need to slightly modify the chest of the fly, making the left side smoother. The lines of the chest should not overlap the legs.

Step 19

Then darken the original guide lines on the left to emphasize the shape of the belly.

Step 20

Draw by analogy three paws on the other side of the body. They should be similar, but slightly smaller and thinner. Bend them and add the same segments. Make sure they don't overlap the leg lines on the right side.

Step 21 (optional)

For a cleaner look, erase the excess from the first guide lines.

How to draw a fly: the final step

Add stroked shading to your drawing to give it more dimension and dimension. Add cast shadows between the paws. This helps ground the fly. Use darker lines near the middle of the shadow, while the edges should be slightly lighter. Add more fuzz on the legs and the whole body using quick, short strokes.

How to draw a fly - now it's clear, but even more value can be given to the drawing with the help of additional details. You can add a more lustrous texture to the upper eye junction area by changing the pressure on the pencil to achieve different degrees of tone. You can also add some color, blue and green.