How to draw a warship with a simple pencil?

2024 Author: Leah Sherlock | [email protected]. Last modified: 2023-12-17 05:25

Most people who start drawing on paper prefer simple graphic sketches that can then be pointed and colored with paints or pencils. Gradually, the complexity of the image increases. This effect is achieved by increasing the load in stages. That is exactly what we will do in this article. We will tell you how to draw a warship.

Draw a simple ship in country style

Drawing a ship is not as easy as it might seem at first glance. Therefore, it is worth starting with the simplest sketch. To do this, we chose an old model of a floating craft that looks like a pirate ship. To draw it, take a blank landscape sheet, a simple pencil and an eraser.

Next, conditionally divide your sheet in half and in the lower half draw a strip perpendicular to the middle, about 1.5-2 cm in size. Place a pencil on top of this line and draw another small line from it (1 cm) to the right side.

Then, before drawing the warship, position the pencil at the bottom of the first straight line and draw a line with a slight curve upwards. Draw a similar curve on top (bothlines will be parallel to each other. After that, connect both features, you get an unusual figure.

Drawing the second part of the ship

In the next step, draw a similar figure, but smaller, next to the previous one. This will be a kind of layout of our ship with a line of demarcation of the figures and a small V-shaped neck at the junction line. Upon closer examination, you will see a ready-made outline of the stern with the bow and lower part of the future vessel.

Our next step is to draw an additional curve at the bottom of the big shape. This must be done not only before you draw the warship step by step, but also in order to complete the stern line (make it smoother and more curved).

We draw the bow and masts on the ship

Now we see what kind of ship we have. To make it more realistic, we recommend drawing an oblique line in its bow (spire on the bow) and three cruciform squiggles (these will be sketches of the masts).

Creating a ship from scratch: how to draw sails easily

Going back to the bow of the ship and its spire. We take a pencil and draw a sail from below, resembling a small elongated rectangle. After that, we go to the first mast, retreat from its top by about 0.5-1 cm. First we draw one and then another strip, which will be parallel to each other. Between them we draw in front and behind along a small curved semi-arc and repeat all this from below, as well as on the neighboring mast. The result should be two masts with foursails. On the third mast, located at the back of the ship, draw a triangular sail instead of a rectangular one.

We draw guns and small details on the ship

Recall that earlier old military or pirate ships were made of wood. In order to add realism to our ship, we will draw horizontal stripes around the entire perimeter of the stern. But at the same time, do not forget to leave room for windows and guns. What is needed for this? Approximately in the center of the ship, draw five round windows, from which neat cannons will stick out, ready for the most serious battle and set up exclusively for victory.

Next, before drawing the warship completely, it remains to add only a few strokes. These will be the tops of the masts, where, as a rule, lookout towers and frigate flags are located.

It is also worth separating the outer part of the vessel from the inner. To do this, make a small side in front and add several compartments of the ship at once. Our water transport is ready. It remains only to paint it in colors suitable for old wooden frigates.

How easy is it to draw an aircraft carrier with pencils?

If you are wondering how to draw a warship like an aircraft carrier, we will show you how to do it. So, at the first stage, we again distinguish between the top and bottom of the album sheet, and also outline its middle.

Next, draw an obtuse angle in the lower plane (its direction will help to indicate the right hand, if you turn it away from you with your palm, bend three fingers infist, and spread your index and thumb fingers apart). From the end points on the corner lines, draw another, but larger in format, obtuse angle. It should look like a slightly elongated diamond.

Draw the main details of the ship

The next step in our instruction "How to draw a ship" (for beginners) will be drawing the main details of the ship. To do this, set the pencil in the middle and conditionally divide our “rhombus” into two triangles. In one of them, which is smaller, draw another obtuse angle and draw two lines upward from it, and then connect them with a rounded hill. You will get a mast on which radar equipment is installed instead of sails.

Back to the original obtuse corner. Take a small line away from him, from it - one more down, and then another one - down and to the side. In total, four lines of different lengths will be obtained, which will form the stern of the ship. Next, draw a small border on the left side of the large diamond.

Finishing the stern and deck of an aircraft carrier

The next step is to draw the deck of an aircraft carrier and stuff it with antennas of various shapes and sizes. To do this, it is best to take the original photo of the ship and try to display its deck on paper. Next, draw a perpendicular line in our rhombus and thereby divide the stern of the ship into two halves.

In one and the other part of it, draw sides, windows and, of course, take-offlanding mark. And at the last stage, decorate the ship and the sea or ocean that it plows in search of military exploits and adventures.

Summary - choosing between two options, you can learn in more detail how to draw a warship with a pencil.