How to draw a maple leaf yourself?

2024 Author: Leah Sherlock | [email protected]. Last modified: 2023-12-17 05:25

The process of creating a drawing is not always long and incredibly difficult. There are a lot of basic rules, adhering to which, you can draw almost anything on paper without much effort. How to draw a maple leaf? Step by step, of course. You only have to complete a few steps. The result will certainly be a charming drawing. You can do it in pencil or in color.

How to draw a maple leaf: outlines

Start with primary lines. It is assumed that the drawing will be done in pencil. In this case, at any time you can fix something or erase lines that have already become unnecessary. The first sketch is three slightly concave straight lines crossed at one point. The central part should be slightly longer than the side ones. Also leave more space at the bottom. The stem will presumably be located there.

How to drawmaple leaf in pencil: continue marking

In order for further drawing to proceed quickly enough and not take much time, put a few dots near the existing lines. This must be done in the following way. Each point should be inside the sharp corners formed by the intersection of the three main lines. They can be put around

center. This will allow you to more accurately draw the edges of the sheet in the future. Without these anchor points, the end result can be uneven or sloppy.

How to draw a maple leaf: start drawing details

With a simple pencil, you need to outline the stalk. Let it be somewhat thicker than the existing line. The drawing of the edges starts from the bottom of the sheet. Lines should not be asymmetrical. Nature does not always create ideal creations. But this is their speci alty. Maple leaf edges may be slightly torn. Straight and clear lines are useless here. Otherwise, the result will be far from the real image.

Not sure how to draw the maple leaf next? Mark the tops above the auxiliary lines. The tips should look like small sharp corners. After that, proceed to drawing the side lines. They should also be asymmetrical. Connect the sides to the corner tops.

How to draw a maple leaf: the final step

To make the drawing morenatural, add streaks. They should turn out thinner than the outline of the sheet. For such fine work, use a hard pencil (marked "T" or "2T"). It will not smudge or stain paper.

The drawing is almost ready. Don't forget to give extra volume with shading and light shadows. Remember that the convex parts should be lighter. Therefore, hatch only those places that will be concave and dark. Use light pressure on the pencil lead. If it is hard, otherwise you will simply tear the paper with the tip. A soft pencil will get very dirty and crumble. And with an eraser, you can delete already successfully drawn lines and completely ruin the finished result.