How to draw a crane? It's an easy matter

2024 Author: Leah Sherlock | [email protected]. Last modified: 2023-12-17 05:25

Drawing is easy. You can draw something in your own way, as you imagine. But sometimes it may be necessary to draw a believable image. Next, consider how to draw a crane as realistic as possible.

Getting Started

In order to draw something, you will need paper, an eraser, pencils, paints and other tools.

You can use special programs ("Photoshop", "Paint" and so on) for drawing. It is much more interesting to draw with your own hands.

To understand how to draw a crane, you need to decide how it will look. Plan its dimensions, come up with a base, valve shape, thickness, etc.

Usually the base is a sink to which the faucet is attached with a metal nut, or a wall.

How to draw a faucet

The first step is to draw the crane itself. Draw two parallel lines with a pencil (if the base is a sink, then vertical, if the wall is horizontal). The length of the lines can be different (about twenty centimeters). The contour forms a semblance of a pipe.

Further, the lines are symmetrically rounded down. From there it willflowing water.

The next step is to draw the valve. The mixer can be either single-valve or two-valve. Be sure to draw all the nuts and washers, bushing and seals that connect the pipe to the valve and flywheel. These items are round and easy to display.

A two-valve faucet is drawn in the same way as a single-valve one, only it will be necessary to draw an additional element symmetrical to the first one.

To make the crane look like a real one, you need to realistically draw a flywheel. This is a mechanism that, when turned, flows water from a water pipe.

The flywheel can also be different: round with branches, double-sided, four-sided, and so on. To draw the first type, you need to make a circle with several branches to the center.

Four-sided and double-sided are very easy to make. A ball is made in the middle of the flywheel, from which small segments are drawn in two or four directions.

But there is also a lever mixer. In this case, it is not necessary to draw a valve with a flywheel. A lever is drawn using two rounded lines.

After the outline of the crane has been completely formed, it needs to be painted. Depending on the material, the colors will be different. The plastic faucet must be painted white. And iron - gray or yellow.

Don't forget about lighting glare. They can be emphasized with strokes of white paint.

The middle of the flywheel is usually painted blue or red, which will show whichvalve, cold or hot water will flow, respectively (this applies to a two-valve faucet).

We looked at how to draw a crane easily and simply. But sometimes you need to draw it with pouring water. Consider this option as well.

How to draw a water faucet? It is very easy. Already to the finished faucet you need to add droplets or a trickle of liquid.

Droplets are displayed easily: a semicircle is made, the two ends of which are connected at the bottom at one point. A trickle is drawn vertical lines. The most important thing is their correct coloring. You can choose a blue color (imitating water) or for realism - black-gray-white lines (after all, the water is transparent).

Afterword

By learning how to draw a crane, you can make other items. After all, as they say, in order to learn how to draw beautifully, you need to go from simple to complex. This will help you understand the color perception of objects, their shape and properties.